GameBoy CM3 Phoenix DIY Kit

GameBoy CM3 Phoenix DIY Kit

CAD $220.00CAD $235.00


CM3+ Storage Size *

Pick the amount of storage you would like on your CM3+

Heatsink *

Cool down and extend the life of your Raspberry Pi with a heatsink!

Charging Accessories *

Battery *

Protection Case *

Protect your investment with a protection case

Game Cartridge Label *

Acknowledgements *


*** BRAND NEW! ***

CM3 Phoenix Kits include the following:

  • Pre-Imaged 16GB CM3+ (Upgradable To 32GB)
  • GameBoy Shell (You Pick The Colour, SHELL IS NOT MODIFIED)
  • Game Cartridge (You Pick The Colour, CARTRIDGE IS NOT MODIFIED)
  • All Front & Rear Buttons (You Pick The Colours)
  • Button Spacers
  • Front Gorilla Glass Screen Cover
  • DMG Speaker
  • 2000mah Battery (Upgradable to 4000mah)
  • Screw Kit
  • Game Cartridge Label
  • All JST Connector Wires
  • Barrel jack to USB adapter
  • Drill Templates
  • CM3 Phoenix PCB Kit (Everything that’s included in this kit listed below)


Most of the work has been done for you in this solderless kit, all in one pro pcb board kit for the classic Gameboy. It’s used to build a Gameboy Zero, all you have to do is plug in your CM3 and your JST connectors, and modify the shell, and you have just saved yourself 2/3 of the time!

This new board has a few more built in options in comparison to our other kits, listed below:

  • no solder kit (plug in everything, screw the case together, and you are ready to go!)
  • Install the included CM3+
  • Contrast wheel (darken the screen to your liking)
  • Power boost & barrel jack

Full feature list that this board offers are listed below:

  • – Comes with 2.8″ SPI Higher Resolution Screen, with built in ZIF connector
  • – Comes with 3D printed screen bracket
  • – Comes with rear bumpers (L & R) button PCB & 3D printed brackets (3D brackets are modified versions of Erik’s Glitched Gaming Brackets)
  • – Safe Shutdown Hardware & Sequence
  • – Battery Monitor Hardware & Indicator
  • – USB Port built into the PCB
  • – 6 Front Button Support (A, B, C, X, Y, Z)
  • – 2 Rear Button Support (L1, R1)
  • – Integrated control pad
  • – Integrated amplified audio, filtering and audio jack
  • – Integrated volume potentiometer
  • – Integrated contrast potentiometer
  • – Integrated power switch
  • – Integrated power boost
  • – Integrated barrel jack


Tools Needed:

  • Philips Head Screwdriver
  • Drill & Drill Bits

The Gameboy shells provided are brand new reproduction shells, and are *NOT* modified, you will NEED to modify the shell yourself, however, the drill templates will be included.

If you have already purchased a DIY kit and would like to change the label you are getting, please message us directly, with the item number located under the label in the pictures.

** If you are purchasing this to be a gift, and need it by a particular date, please contact us directly PRIOR to purchasing so that we can discuss it. WE CAN NOT CHANGE THE GIFT STATUS AFTER ORDER HAS BEEN PURCHASED.

** These are built in batches of 20 so we can keep up with demand, and hand soldered by Renegade Labs in-house, time frame can be around 6-8 months (8-12 months, depending on order loads & parts delays due to COVID-19) for shipment.

** Refunds/returns are on a case-by-case basis, if approved, a 15% restocking fee & the original shipping cost will be deducted from the refund once the product is received back and checked. Canceled orders are subject to a 15% cancellation fee. The cancellation fee of 15% is to cover the cost of labor that has already been applied to the order. These fees & our return policy is non-negotiable and no exceptions will be made. Upon purchasing this product, you have read, understood, and agree to this policy. If you have any questions, please contact our support staff.

** Orders placed before May 19, 2020, will still have their shells modified.

Additional information

Shell Color

Gray, Black, White, Yellow, Red, Teal, Translucent Orange, Translucent Blue, Translucent Red, Translucent Green, Translucent Clear

Buttons Color

SNES Purple Buttons, SNES Multi-Color, Classic Red Buttons, Black, Green, Blue, Yellow, Red, White, Clear, Transparent Orange, Transparent Red, Transparent Blue, Transparent Green

Game Cartridge Color

Gray, Yellow, Clear, Transparent Blue, Transparent Green

Shell Modification Service

No (The shell will not be modified)

Simple Tool Kit

No, Yes (+$15 CAD)

You may also like…

COVID-19 Update: In-House Production Continues, Delays with inbound parts & outbound shipments, Read More...