GameBoy Zero AIO PRO DIY Kit

GameBoy Zero AIO PRO DIY Kit

CAD $120.00CAD $135.00

Clear

Raspberry Pi Zero *

Include the Raspberry Pi Zero to complete your DIY package!

*** Please note: Because this is a DIY kit, we will not be able to solder this onto your AIO Pro board, if you are looking for such a service, we offer full builds as well! ***

Charging Accessories *

Memory Card *

Battery *

Protection Case *

Protect your investment with a protection case

Acknowledgements *

Description

*** LIMITED TIME OFFER***

AIO Pro Full Kits include:

  • Pre-Imaged 16GB Micro SD-Card (Upgradable To Larger Sizes)
  • GameBoy Shell (You Pick The Colour, SHELL IS NOT MODIFIED)
  • Game Cartridge (You Pick The Colour, CARTRIDGE IS NOT MODIFIED)
  • All Front & Rear Buttons (You Pick The Colours)
  • Front Gorilla Glass Screen Cover
  • DMG Speaker
  • PowerBoost Charger
  • 2000mah Battery (Upgradable to 4000mah)
  • Battery JST Connector
  • Pre-Cut Silicone Shrouded Premium Wire (26AWG)
  • Drill Templates
  • AIO Pro PCB Kit (Everything that’s included in this kit listed below)

*** YOU WILL HAVE TO PROVIDE YOUR OWN RASPBERRY PI ZERO (OR PI 3) ***

 

Most of the work has been done for you in this controller all in one pro pcb board for the classic Gameboy. It’s used to build a Gameboy Zero, all you have to do is solder on your Raspberry Pi Zero and a couple of odds and ends and you have just saved yourself half the time!

This board comes with quite a bit of integration, list as follows:

– Comes with 3.2″ SPI Higher Resolution Screen, with built in ZIF connector
– Comes with 3D printed screen bracket
– Comes with rear bumpers (L & R) button PCB & 3D printed brackets (3D brackets are modified versions of Erik’s Glitched Gaming Brackets)
– Safe Shutdown Sequence
– Battery Monitor Indicator
– USB Port built into the PCB
– 6 Front Button Support (A, B, C, X, Y, Z)
– 4 Rear Button Support (L1, R1, L2, R2)
– Integrated controller to the GPIO pins
– Integrated amplified audio, filtering and audio jack
– Integrated volume potentiometer
– Integrated power switch
– Placement of Pi Zero aligns the sdcard to the contrast port
– Added extra pads for ground, 5 volts and 3.3 volts

Primary Selection options are as follows:
– No components installed, just the basic pcb for DIY
– PCB with components installed, including the screen & screen bracket

** If you are purchasing this to be a gift, and need it by a particular date, please contact us directly PRIOR to purchasing so that we can discuss it. WE CAN NOT CHANGE THE GIFT STATUS AFTER ORDER HAS BEEN PURCHASED.

** Time frame is about 6-8 months (8-12 months, depending on order loads, and delays of supplies due to COVID-19)

** Refunds/returns are on a case-by-case basis, if approved, a 15% restocking fee & the original shipping cost will be deducted from the refund once the product is received back and checked. Canceled orders are subject to a 15% cancellation fee. The cancellation fee of 15% is to cover the cost of labor that has already been applied to the order. These fees & our return policy is non-negotiable and no exceptions will be made. Upon purchasing this product, you have read, understood, and agree to this policy. If you have any questions, please contact our support staff.

** Orders placed before May 19, 2020, will still have their shells modified.

Additional information

Shell Color

Gray, Black, White, Yellow, Red, Teal, Translucent Orange, Translucent Blue, Translucent Red, Translucent Green, Translucent Clear

Buttons Color

SNES Purple Buttons, SNES Multi-Color, Classic Red Buttons, Black, Green, Blue, Yellow, Red, White, Clear, Transparent Orange, Transparent Red, Transparent Blue, Transparent Green

Game Cartridge Color

Gray, Yellow, Clear, Transparent Blue, Transparent Green

Shell Modification Service

No (The shell will not be modified)

Simple Tool Kit

No, Yes (+$15 CAD)

You may also like…

COVID-19 Update: In-House Production Continues, Delays with inbound parts & outbound shipments, Read More...
*** WE NOW OFFER FREE SHIPPING ON ALL PRODUCTS! ***